Coway APM-1010DH Instructions Manual page 13

HOw TO USE
- Connect the power plug to the electrical outlet before operating the product.
- When the air purifier is turned on, it automatically operates in Auto mode.
Tips
To Operate the Manual Mode
Turn the product on by pressing the Power button and select an airflow
speed by pressing the Airflow speed button.
Step 1 → Step 2 → Step 3 → Turbo
To Select the Auto Mode
Turn the product on by pressing the Power button and select a mode by
pressing the Mode button.
Auto → Silent → Dust
▶
Auto mode
Automatically controls the airflow speed (Step 1, 2, 3 and 4) according to the air pollution level
detected by the particle sensor in order to purify the air more effectively. This operating mode is
appropriate for general users.
Airflow speed
▶
Silent mode
Minimizes the airflow for the air purification or humidifying air purification operation to ensure a
quiet, pleasant environment. This mode is a low-noise and low power consumption mode.
- In Silent mode, the Airflow speed indicator is turned off.
▶
Dust mode
This mode effectively removes any house dust in the room.
This mode maximizes the airflow to remove the house dust from the air in the room.
The airflow speed continually alternates between steps 3 and 1 regardless of the pollution level.
Airflow speed step 3 continues for 10 minutes and then step 1 continues for 30 minutes. Airflow
speed step 3 blows the house dust into the air and step 1 purifies the air.
▶
Sleep mode (only when Auto mode is selected)
If the surrounding illumination is dark for more than 3 minutes, the unit automatically switches to
sleep mode, lowers the airflow speed, noise and power consumption.
If the surrounding illumination is bright again for 5 minutes or longer, the unit resumes normal
operations.
In sleep mode, all displays except for the power indicator are turned off.
Pollution level 1 Pollution level 2
Step 1 Step 2
Pollution level 3 or higher
Step 3
11
12