HandHeld ALGIZ RT7 Manual page 28

Configurable Bluetooth Power Class
The Bluetooth interface on the Algiz RT7 may be configured to run at two power levels:

Class 2 operation. This is the default, and provides a short range of operation.

Class 1 operation. This is a high power mode, providing a longer range of operation.
To make effective use of the higher power, both devices must operate in Class 1.
To change the power class, select the "Bluetooth Power" menu option from Bluetooth configuration, as shown in
disabled when Bluetooth is on. The user can then select the required power class, as shown in Figure 5.14,
FIGURE 5.13. SELECT BLUETOOTH POWER FROM BLUETOOTH SETTIN
Ver 1.2
d, as shown in Figure
28