Storing Fpl 0 As A Numbered Flight Plan - Honeywell KLN 900s Pilot's Manual

4.1.6 Storing FPL 0 As A Numbered Flight Plan

The active flight plan (FPL 0) may be copied to a num-
bered flight plan (FPL 1, FPL 2, ... , or FPL 25) so that it
can be recalled for later use. This may be desirable, for
example, if the active flight plan was originally created on
the FPL 0 page and not as a numbered flight plan. To
store the active flight plan (FPL 0) as a numbered flight
plan (FPL 1, FPL 2, ... , or FPL 25):
1. Select a numbered flight plan page which does not
contain any waypoints (figure 4-25). If none exist, use
the procedure described in section 4.1.5, "Deleting
Flight Plans," to clear a flight plan which is no longer
required.
2. Press the left C to turn on the left cursor function
with the cursor over the blank first waypoint position
(figure 4-26).
3. Rotate the left outer knob one step counterclockwise
to position the cursor over LOAD FPL 0? (figure 4-
27).
4. Press E to load the active flight plan into this num-
bered flight plan (figure 4-28).
LOAD FPL 0?|
FPL 7
LOAD FPL 0?|
1:
CRSR
Figure 4-26
USE? INVRT?|
FPL 7
4-6
1: |
|
|
|
|
Figure 4-25
LOAD FPL
| 1:
|
|
|
|
CRSR
Figure 4-27
1:KHOU |
2:DAS |
3:LFK |
4:BEKEN |
5:KSHV |
Figure 4-28
0?|
|
|
|
|
|
Rev 2