The Calculator 7 Page (Cal 7) - Honeywell KLN 900s Pilot's Manual

5.3.7 The Calculator 7 Page (CAL 7)

The CAL 7 page is used to display the times of sunrise
and sunset for any waypoint in the published or user
database. It can do this for any date you desire until
December 31, 2087. Amazing you say! Yes, but it's
true! To use the CAL 7 page:
1. Select the CAL 7 page on the left side (figure 5-49).
The first time the CAL 7 page is selected after the
KLN 900 is turned on, the waypoint identifier defaults
to the current destination, the date defaults to the cur-
rent date, and the time zone defaults to the system
time zone. Each of these three items may, however,
be changed. The sunrise and sunset times are dis-
played at the bottom of the page.
NOTE: The time zone initially displayed is the system
time zone. This is the same as the one on the SET 2
page. Note that the time zone displayed may not be
appropriate for the waypoint shown. For example, the
waypoint shown could be KLAX and the time zone may
be Eastern Standard Time (EST). Make sure you select
the appropriate time zone for the displayed waypoint.
2. Press the left C to turn on the left cursor function.
3. If desired, select another waypoint identifier using
the left inner and outer knobs. Press E to view the
waypoint page for the waypoint entered. Press E
again to approve the waypoint page (figure 5-50).
4. If desired, select another date using the left inner
and outer knobs. You must press E to enter the
date (figure 5-51).
5. If desired, select another time zone. The sunrise
and sunset times for the selected waypoint, date,
and time zone are now displayed (figure 5-52).
6. Press the left C to turn off the left cursor function.
SUNRISE/SET|
KORD
RISE
SET
CAL 7
SUNRISE/SET|
KATL
RISE
SET
CRSR
SUNRISE/SET|
KATL
10 MAR 99|
CST|
RISE 05:55|
SET 17:41|
CRSR
Figure 5-51
5-15
|
03 MAR 99|
CST|
06:24|
17:43|
Figure 5-49
|
03 MAR 99|
CST|
06:04|
17:35|
Figure 5-50
SUNRISE/SET|
|
KATL
10 MAR 99|
RISE 06:55|
SET 18:41|
CRSR
Figure 5-52
|
EST|
Rev 2