Using the PTZ Camera Controls
If you are accessing a standalone pan-tilt-zoom (PTZ) camera, you can
control Focus and Presets in the same way as other cameras but you also
have access to other features that are specific to the PTZ camera.
1. To zoom the camera:
•
Adjust the Zoom slider.
•
Or, click and drag to create a green box on the image panel
to define the area you want to zoom in and see.
2. To move the camera:
•
Click anywhere on the image panel to center the camera to
that point.
•
Or, drag your mouse from center to move the camera in that
direction. The farther the arrow is from center, the faster the
camera will move.
3. To perform a guard tour, select a tour from the drop down list then
click Start. To setup a tour, see PTZ Tours on page 21.
4. To stop a guard tour, click Stop. You can pause a tour at any time
just by using the other PTZ controls.
5