Editing Ptz Tours - Avigilon H3-B1 User Manual

3. Give the tour a name.
4. In the Mode drop down list, select one of the following:
• Sequential: the PTZ camera will go to each preset in the set
order.
• Random: the PTZ camera will go to each preset in random
order.
5. Select the Set as default tour check box if you want this tour to
run automatically.
• The Default Tour Idle Start Time field is now enabled, enter
the amount of time the PTZ camera must be idle for before
this tour automatically begins.
6. To add a preset, click Add Preset and a preset is added to the
list.
a. In the Preset column, select a preset from the drop down list.
b. In the Move Speed column, enter how fast you want the PTZ
camera to move to this preset. The speed is 80% by default.
c. In the View Time column, enter the amount of time you want
the PTZ camera to stay at this preset position. The view time
is 10 seconds by default.
d. Continue until all the presets for this tour have been added.
7. To remove a preset, click the (x) icon to the far right of the preset.
8. To re-order a preset, click the up and down arrows or click and
drag the left edge of the preset through the list.
9. Click Apply to save the tour.

Editing PTZ Tours

1. Among the Setup options, click PTZ Tours.
2. Click Edit.
3. Make the changes you need.
4. To undo the changes that you've made, click Discard Changes.
5. Click Apply to save your changes.
6. To delete the tour, click Delete Tour. When the confirmation
dialog box appears, click OK.
22