Table of Contents
Advertisement
[ IV Remote Controller ]
Settings details
[4]-1. Display language setting
The display language can be selected from the languages listed below.
• Press the [
MENU] button to change the language.
1
2
English (GB),
German (D),
Italian (I),
French (F),
5
6
7
[4]-2. Function lock settings
(1) Function lock
• Press the [
ON/OFF] button to toggle through the following options.
1
no1: All buttons except the [
2
no2: All buttons will be locked.
3
OFF (Default): No buttons will be locked.
*
Press and hold the [CIR.WATER] and [
simultaneously for two seconds on the Normal Operation screen to enable
the button-lock function.
(2) Operation mode skip setting
The following modes can be made available for selection or can be hidden.
• Press the [
ON/OFF] button to toggle through the following options.
1
Heating mode
2
Heating ECO mode
3
Hot Water mode
4
Anti-freeze mode
5
Cooling mode
6
OFF (Default): All modes will be available for selection.
*
The mode that is not supported on the connected unit will not be available,
even if the mode is available for selection on the display.
(3) Temperature range limit setting
The temperature range for the following modes can be restricted. Once the
range has been restricted, the preset temperature can only be set to a value
within the restricted range.
• Press the [
ON/OFF] button to toggle through the following options.
1
LIMIT TEMP HEATING MODE
2
LIMIT TEMP HOT WATER MODE
3
LIMIT TEMP ANTI-FREEZE MODE
4
LIMIT TEMP COOLING MODE
5
OFF (Default) : The temperature ranges are not active.
• To increase or decrease the temperature, press the [
] button.
• Settable range
Hot Water mode : Lower limit:
Upper limit:
Heating mode
: Lower limit:
Upper limit:
*
The settable range varies depending on the type of unit to be connected.
HWE10060
3
4
Spanish (E),
Russian (RU),
Swedish (SW)
ON/OFF] button will be locked.
ON/OFF] buttons
TEMP.
25 ~70 °C
(77 ~158 °F)
70 ~25 °C
(158 ~ 77 °F)
25 ~55 °C
(77 ~131 °F)
55 ~25 °C
(131 ~ 77 °F)
[4]-3. Basic functions
(1) Remote controller main/sub setting
• Press the [
ON/OFF] button
1
Main
The controller will be designated as the main controller.
2
Sub
The controller will be designated as the sub controller.
(2) Use of clock setting
• Press the [
ON/OFF] button
1
ON
The clock function.
2
OFF
The clock function.
(3) Timer function setting
• Press the [
ON/OFF] button
1
WEEKLY TIMER (Default)
2
AUTO OFF TIMER
3
SIMPLE TIMER
4
TIMER MODE OFF
*
When the use of clock setting is set to OFF, the "WEEKLY TIMER" cannot
be used.
(4) Contact number setting
• Press the [
ON/OFF] button
1
CALL OFF
2
CALL **** *** ****
CALL_
• Setting the contact number
To set the contact number, follow the following procedures.
Press the [
TEMP.
right (left). Press the [
contact number.
(5) Temp offset setting
• Press the [
ON/OFF] button
1
ON
The offset value will be displayed under the water
temperature initial setting mode.
2
OFF
The offset value will not be displayed.
or
[4]-4. Display options
(1) Temperature unit °C/°F setting
• Press the [
ON/OFF] button
1
°C
Celcius
2
°F
Fahrenheit
(2) Water temperature display setting
• Press the [
ON/OFF] button
1
ON
The water temperature will be displayed.
2
OFF
The water temperature will not be displayed.
- 47 -
D
to toggle between the following options.
D
to toggle between the following options.
D
to toggle through the following options.
D
to toggle through the following options.
The contact number will not be displayed when a
problem occurs.
The contact number will be displayed when a
problem occurs.
Use this option to enter the contact number.
or
] button
F
to move the cursor to the
CLOCK
or
] button
C
to set the
D
to toggle between the following options.
D
to toggle between the following options.
D
to toggle between the following options.
GB
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
