Using The Remote Controller; Starting And Stopping Operation And Changing The Operation Mode; To Stop Operation; To Select The Mode - Mitsubishi Electric CAHV-P500YA-HPB Service Handbook

[ IV Remote Controller ]
IV Remote Controller

[1] Using the Remote Controller

<1> Starting and Stopping Operation and
Changing the Operation Mode
2
3
Set Tempera-
3
ture buttons
Mode (BACK)
2
BACK MONITOR/SET
button
PAR-W21MAA
To Start Operation
1. Press the ON/OFF (BACK) button
The power indicator 1 and the display will light up.
HWE10060
4
˚C
˚C
1
TEMP. ON/OFF
MENU ON/OFF INITIAL SETTING CIR.WATER
DAY CHECK TEST
1
CLOCK CLEAR
1
.

To Stop Operation

1. Press the ON/OFF (BACK) button
The power indicator
The remote controller will remember the last mode and temperature
settings when turned off.

To select the Mode

1. With the power turned on, press the Mode (BACK) button
desired mode appears.
Power
• Each press changes the operation mode in the following sequence
Indicator
(see notes *1 and *2 below):
Heating→Heating ECO→Hot water→Anti-freeze
ON/OFF →Back to Heating.
(BACK)
The currently selected mode will appear in the area labeled
button
*1 The available modes vary depending on the model.
*2 Refer to [4]-2. (2) (page 47) for how to change the settings for a
specific function.
- 41 -
1
while the unit is in operation.
and the display will light off.
1
2
until the
2 .
GB