Colour Coding By Märklin; Motor And Track Connections; Connecting Dc And Coreless Motors - Esu LokPilot V3.0 User Manual

6.6.3. Colour Coding by Märklin®
Märklin® uses a different colour coding system compared to the
DCC colours. Please refer to Fig. 8 for more information.

6.6.4. Motor and Track Connections

Firstly, please cut all wires installed in the locomotive. Take special
care to remove any connections to the chassis: the motor leads
must be positively potential-free, in other words the may not
have any contact to the chassis or body or the wheels and wheel
contacts. It is particularly easy to overlook such connections in
Fleischmann® locomotives.
Make notes of which motor lead connects the motor with the
right and the left wheel contact. This avoids mistakes and assures
that your locomotive runs in the right direction.
Please check all connections with an Ohmmeter. Search for
short circuits, particularly between the motor leads and the wheel
contacts.
Description
AC: Power pickup show („Schleifer") (Center Rail)
DC: right track connection
AC: Outside Rails
DC: left track connection
left motor terminal
right motor terminal
common (rectified track voltage) (+Pole) for function outputs
function output Rearlights
function output Headlights
function output AUX1
function output AUX2
function output AUX3 (logic level only occasionally, depending on decoder type)
function output AUX4 (logic level only occasionally, depending on decoder type)
Figure 8: Colour coding by Märklin® in contrast to the DCC wiring code
•Connect the red wire to the right rail pickup or the centre pick
up in AC models.
•Connect the black wire to the left rail pickup or the chassis in
AC models.
•Connect the orange wire with the motor terminal, which originally
lead to the right wheel pick up (centre pick up in AC models).
•The grey wire goes to the terminal, which originally connected
to the left rail (chassis for AC models).

6.6.4.1. Connecting DC and Coreless Motors

You may use all DC motors commonly used for model trains
provided they do not exceed the current limit of the decoder.
In some cases with the 5-pole High Performance Drive by
Märklin®, you may find three anti-interference capacitors:
the two capacitors connected directly to the motor leads and the
motor housing MUST be removed (also refer to Fig. 9 on the
following page).
Märklin color ESU color (following NMRA DCC standard)
red red
brown black
blue orange
green gray
orange blue
yellow yellow
gray white
brown/red green
brown/green violet
brown/yellow -
brown/white -
15