Locomotives With 6-Pole Nem 651-Interface - Esu LokPilot V3.0 User Manual

6.4. Locomotives with 6-pole NEM 651-Interface

Some LokPilot V3.0 decoders have a 6-pole NEM 651 plug (as
per Fig. 2). Installation in locomotives with this interface is
particularly easy:
•Remove the locomotive body. Please observe the instructions in
the manual of your locomotive!
(violet) AUX2 -- -- -- -- --
right motor terminal -- -- -- -- --
right track connection -- -- -- -- --
rearlight -- -- -- -- --
(blue) common(+pole) -- -- -- -- --
(green) AUX1 -- -- -- -- --
headlight -- -- -- -- --
left track connection -- -- -- -- --
left motor terminal -- -- -- -- --
(blue) common(+pole) -- -- -- -- --
right motor terminal -- -- -- -- --
left motor terminal -- -- -- -- --
right track connection -- -- -- -- --
left track connection -- -- -- -- --
headlight -- -- -- -- --
rearlight -- -- -- -- --
soldering pad AUX1 (Logic level!) -- -- -- -- --
(blue) common(+pole) - - - - -
- - - - -
right motor terminal
left motor terminal
right track connection
left track connection
headlight
rearlight
soldering pad AUX1 (Logic level!)
Pin Description
1 right motor terminal
2 left motor terminal
3 right track connection
4 left track connection
5 headlight
6 rear light
Figure 2: LokPilot V3.0 (DCC), LokPilot micro V3.0 - NEM651
52611 LokPilot V3.0
52687 LokPilot micro V3.0
52684 LokPilot micro V3.0
DCC
52686 LokPilot micro V3.0
52685 LokPilot micro V3.0
DCC
Color
orange
gray
red
black
white
yellow
•Remove the dummy plug from the socket and keep it in a suitable
place for later use.
•Insert the plug of the decoder in such a way that pin 1 of the
plug (this is the side with the red / orange wires) sits next to the
corner of the socket that is usually marked with *, +, • or 1.
Please make sure that the pins are straight when inserting the
plug.
n.c. 1
22 right track
n.c. 2 21 left track
n.c. 3 20 GND
AUX4 4 19 right motor
n.c. 5
18 left motor
n.c. 6 17 n.c.
rearlight 7 16 common (+)
headlight 8
15 AUX1
n.c. 9 14 AUX2
n.c. 10 13 AUX3
Index pin 11 12 VCC
n.c. 1 22 right track
n.c. 2 21 left track
n.c. 3 20 GND
AUX4 4
19 n.c.
n.c. 5 18 n.c.
n.c. 6 17 n.c.
rearlight 7 16 common (+)
headlight 8 15 AUX1
n.c. 9 14 AUX2
n.c. 10
13 AUX3
Indexpin 11 12 VCC
How to connect the decoder:
locomotive pcb
locomotive pcb
Figure 3: LokPilot V3.0, LokPilot V3.0 M4 - 21MTC
52614 LokPilot V3.0
52621 LokPilot Fx V3.0
Insertion of decoder with
Connector to the top
(e.g.. Hobby trade, HAG, Märklin)
Insertion of decoder with
connector to the bottom
(e.g. Brawa)
11