Chapter 1 - User Interfaces On Siemens Bt300; Drive Keypad; Keypad Buttons - Siemens bt300 Operator's Manual

Chapter 1 - User Interfaces on Siemens BT300

This chapter presents the different user interfaces on Siemens BT300:
● Keypad
● Siemens NET
● Fieldbus

Drive Keypad

The control keypad with graphical interface is the interface between the Siemens BT300 HVAC Drive and the user.
With the control keypad it is possible to control the speed of a motor, to supervise the state of the equipment and
to set the variable frequency driver's parameters.

Keypad Buttons

The keypad features nine buttons used to configure and control the drive.
● This button (back/reset) allows you to move backwards in the menu, backup a step when using a wizard,
exit the edit mode, or reset a fault (when held for approximately one second).
● or These buttons allow you to scroll up (or down) in the menu or increase (or decrease) a parameter
value when editing.
Siemens Industry, Inc.
Building Technologies
Figure 1: Keypad Buttons.
Siemens BT300 HVAC Drive
Chapter 1 - User Interfaces on Siemens BT300
Drive Keypad
11 | 180
DPD01809
2016-06-07