General Information; Introduction - Dantherm cdp 75 Service Manual

General information

Introduction

Manual, part no.
Target group
Copyright
Reservations
EC-Declaration of
Conformity
Recycling
24
This topic gives the general information about this service manual and about the unit.
Part number of this service manual is 976572.
The target group for this service manual are the technicians who install and maintain
the CDP 75/125/165 unit.
Copying of this service manual, or part of it, is forbidden without prior written permission
from Dantherm Air Handling.
Dantherm Air Handling reserves the right to make changes and improvements to the
product and the service manual at any time without prior notice or obligation.
Dantherm Air Handling A/S, Marienlystvej 65, DK-7800 Skive hereby declare that the
units mentioned below:
are in conformity with the following directives:
98/37/EEC
73/23/EEC
89/336/EEC
- and are manufactured in conformity with the following standards:
EN 60335-2-40
EN 292
EN 50081-1-EMC
EN 50082-1 EMC
Skive, 16.08.2001
The unit is designed to last for many years. When the time comes for the unit to be re-
cycled, it should be recycled according to national rules and procedures to protect the
environment.
The CDT dehumidifiers contain R407C refrigerant and compressor oil. The compressor
must in connection with disposal be returned to authorities.
Dehumidifiers, type CDP 75/125/165:
Directive on the safety of machines
Low Voltage Directive
EMC Directive
Standard for electric dehumidifiers
Machine Safety
Generic Standard for Emission
Generic Standard for Immunity