Kemppi FastMig MSF 53 Operating Manual page 8

Functions of SF 52 and SF 53 function panel
EN
9.
1. Main switch
2. a) Wire feed speed/welding current/sheet strength display
b) Display of selected adjustable parameter
3. Activation of welding dynamics adjustment
4. Selection of gas/water cooled MIG gun
5. Gas purge
6. Weld data: Last used welding parameters shown in displays
7. Wire inch
8. a) Welding voltage display
b) Display of value of selected adjustable parameter
9. 1-MIG selection check/1-MIG welding arc selection activation
10. a) Selection of MIG process: 2T/4T
b) Changing of basic parameters of the unit, SETUP (long pressing)
11. Selection of welding process MIG,1-MIG, MMA, FR-MIG *)
12. Activation of additional MIG function parameter adjustment
13. Selection of additional MIG functions
14. a) Adjustment of wire feed speed
b) Adjustment of welding power setting (1-MIG)
c) Adjustment of rod current
d) Selection of SETUP parameter
e) Selection of 1-MIG arc (material)
15. Memory channels, storage of MIG parameters
16. a) Welding voltage display
b) Adjustment of length of welding arc (1-MIG)
c) Adjustment of MIG dynamics
d) Adjustment of SETUP parameter
e) Selection of 1-MIG arc
17. Manual control/remote control unit selection
*) FR-MIG for root pass welding is not included in standard delivery
6
1. 2. 3.
10. 12. 13.
11.
4. 5. 6.
14.
15
7. 8.
16. 17.