Element4 Modore 140 Installation Manual
  1. Manuals
  2. Brands
  3. Element4 Manuals
  4. Indoor Fireplace
  5. Modore 140
  6. Installation manual

Element4 Modore 140 Installation Manual

Hide thumbs Also See for Modore 140:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installer and User Manual
Installation manual (EN/UK)
Modore 140 MKП/ Bidore 140 MKП/
Trisore 140 MKП
Warning:
The combustion chamber of this stove should only be opened and serviced
by a registered gas installer.
Leave these instructions as manual with the device

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Modore 140 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Element4 Modore 140

Summary of Contents for Element4 Modore 140

  • Page 1 Installation manual (EN/UK) Modore 140 MKП/ Bidore 140 MKП/ Trisore 140 MKП Warning: The combustion chamber of this stove should only be opened and serviced by a registered gas installer. Leave these instructions as manual with the device...

  • Page 3: Table Of Contents

    17 Dimensional drawings ������������������������������������������������������������������19 4 Installation requirements �������������������������������������������������������������������6 17�1 Control hatch, BDLE4 ����������������������������������������������������������������19 4�1 Distance between combustible materials ����������������������������������������6 17.2.1 Modore 140 MKП ��������������������������������������������������������������������20 4.2 Important points - fireplace �������������������������������������������������������������6 17.2.2 Bidore 140 MKП ���������������������������������������������������������������������21 4�3 Important points gas connection �����������������������������������������������������6 17.2.3 Trisore 140 MKП...

  • Page 4: Ce Declaration �����������������������������������������������������������������������������������4 12�1 Location At Roof Outlet

    We hereby declare that the design and construction of the Do not place additional imitation wood or glowing gas decorative heating appliance by Element4 complies material on the burner or in the combustion chamber� with the requirements of the Gas appliances directive�...

  • Page 5: Remote Control With Full Electronic Ignition

    InstallatIon manual 3 Remote control with full electronic ignition 3.1.3 Switching off the fireplace The unit is operated using a remote control (fig. 1). The You switch off the fireplace by pressing the on/off button, ignition, regulating the flame height and switching off is this also turns off the pilot light! done using the remote control, operating a receiver (fig.

  • Page 6: Installation Requirements �������������������������������������������������������������������6 17�1 Control Hatch, Bdle4

    US of Metaloterm/On Top� The use of other concentric stainless steel systems is only permitted if it has the same technical specifications as the aforementioned system US. Only when using these materials can Element4 guarantee a safe and proper working�...

  • Page 7: 5�3 Assembly And Placement Of Discharge Material

    It is possible to operate your appliance via Smartphone To do this, use for instance the ventilation grills CVRE4 or Tablet. Fit the fireplace with a dedicated receiver and and the control hatch (BDLE4) of Element4, see control box� dimensional drawing page 21�...

  • Page 8: Glass Removal

    InstallatIon manual 7 Glass removal Before you start: Prepare a safe place to store the glass plate and use the suction cup to remove the glass� Take the following steps to remove the glass: Remove the edge strips 1, 2 and 3. fig. 7.1, Position the suction cup on the glass sheet.

  • Page 9: Installing The Decorative Material

    InstallatIon manual 8 Installing the decorative material 9 Check installation and first use Make sure that the grid is placed firmly at the bottom Remove the glass sheet from the appliance if necessary of the burner chamber and that the long groove in the and use the pre-pressure measuring nipple on the gas middle of the grid lies in one line parallel with the burner regulator to bleed the gas pipe! fig 9.1 and 9.2.

  • Page 10: Important Points Installation

    InstallatIon manual 10 Important points installation 11.2 Main chimney rules. 11.2.1 Determining the chimney diameter To guarantee fire safety around flue material, a casing is necessary� Use heat resistant sheet materials� The main rule is that the chimney must always be Do not insulate a vent shaft, it must be ventilated! so that 200/130 in diameter�...

  • Page 11: 11�2�6 Flue Gas Restrictor

    InstallatIon manual 11.2.6 Flue gas restrictor Take care with curves! Curves give extra resistance in the system and should therefore be included in the TVP and THP. A limiter of 35 mm is mounted as standard in the combustion chamber� This is mounted in addition to the We have two kinds of curves, being: flue gas opening.

  • Page 12: 11�2�7 Calculation Table Horizontal Outlet Pipe Diameter 200/130

    Categorie 1 Reken tabel horizontale uitmonding pijpdiameter 200/130 InstallatIon manual 11.2.7 Calculation table horizontal outlet pipe diameter 200/130 Reken tabel verticale uitmonding pijpdiameter 200/130 11.2.8 Calculation table vertical outlet pipe diameter 200/130...

  • Page 13: Outlet Location

    InstallatIon manual 12 Outlet location Dimensions Position at end Distance (mm) Directly beneath an opening, ventilation brick, open window etc� Above an opening, ventilation brick, open window etc� Next to an opening, ventilation brick, open window etc� Under gutters or drainage pipes Under roof edges Under balconies or roofs of open garages From a vertical drainage pipe...
  • Page 14 InstallatIon manual 12.1 Location at roof outlet “Distance” = minimum distance required to position the outlet to prevent negative effects involving: A� A ventilation opening of a used room, toilet or bathroom B. Hot air supply, like the supply flowing through a room in use. C�...
  • Page 15 : 12HG20@20 mbar Ireland : 12HG20@20mbar LPG: United Kingdom : 13B/P G30/G31@30mbar, 13+G30/G31@28-30/37mbar Ireland : 13+ G30/G32@28-30/37mbar Trisore 140 MKII, Bidore 140 MKII and Modore 140 MKII PIN: 0359CN1268 Natural Gas Gas Category I3B/P Supply Pressure (mbar) 28-30/37 Nominal Input...

  • Page 16: 14�2 Maintenance Instructions For Installer

    InstallatIon manual 14 Instructions for use 14.3 Anti-reflective glass We advise you to have it checked annually by a qualified Anti-reflective glass is polished ceramic glass to which specialist in order to guarantee safe use and a long service 10 layers of metal oxide coating was applied� The life, thickness of the coating is checked to the nanometre to garanderen,...
  • Page 17 InstallatIon manual 15 Emergency repairs You will find an overview of the possible cause and solutions below. Problem Possible Cause Solution A� No transmission 1� The (new) communication 1� Hold the reset button of the receiver (motor not running) code between receiver and pushed in until you hear 2 beeps�...
  • Page 18 InstallatIon manual Problem Possible Cause Solution F� Electronics continue to spark 1. Damaged receiver. 1. Replace the receiver and confirm the code while pilot light is burning G� Pilot light is burning but 1� Thermocouple is not working� 1�1 Measure the voltage, using a digital multi-meter solenoid valve closes after app�...

  • Page 19: 17 Dimensional Drawings

    InstallatIon manual 16 Packaging materials The packaging of the appliance is recyclable� The following can be used: • Cardboard • CFC-free foam (soft) • Wood • Plastic • Paper These materials must be disposed of in a responsible manner and in accordance with the official regulations Batteries should be disposed of as chemical waste�...

  • Page 20: 17.2.1 Modore 140 Mkп

    InstallatIon manual 17.2.1 Modore 140 MKП 1400 1493 1398 1388 1410...
  • Page 21 InstallatIon manual 17.2.2 Bidore 140 MKП 1432 1400 1434 1424 1388 1441...

  • Page 22: 17.2.3 Trisore 140 Mkп

    InstallatIon manual 17.2.3 Trisore 140 MKП 1450 1400 1470 1450 1388 1506...
  • Page 23 InstallatIon manual 18 Parts Ontop flue material On the following pages you will find a description of the components that can be used with the installation with the closed combustion system of this unit� The part number in the table refers to the number of the part on the following pages� This number is also the number that is used to designate components in the proposed installation schedules�...
  • Page 24 InstallatIon manual...
  • Page 25 InstallatIon manual...
  • Page 26 InstallatIon manual...
  • Page 27 InstallatIon manual...
  • Page 28 InstallatIon manual...
  • Page 29 5) If the installer cannot resolve the fault itself, he may request Element4 BV to do so, if this is within the limits of the Benelux� 6) Only after prior consultation can the entire device or parts of it be sent in for inspection or repair�...
  • Page 32 Element4 B.V. Paxtonstraat 23 8013 RP Zwolle January 2016 The Netherlands...

This manual is also suitable for:

Bidore 140Trisore 140

Table of Contents