Software; Monitoring And Control Software; Configuration Software - Riello 5KVA Installation And Use Manual

U
SE
S
OFTWARE

Monitoring and control software

NetworkMonitor3 software ensures effective and intuitive UPS management by displaying the most
important information such as input voltage, applied load and battery capacity.
It can also automatically perform programmed shutdown operations and send e-mails, SMS and network
messages when certain user-defined events occur.
Installation Operations:
• Connect the RS232 communication port on the UPS to a COM communication port on the PC using the
serial cable provided* or connect the USB port on the UPS to a USB port on the PC using a standard
USB cable*.
• Insert the CD-Rom and select the required operating system.
• Follow the installation instructions.
• For more detailed information on installing and using the software, refer to the software manual in the
Manuals folder on the CD-Rom provided.
Visit the manufacturer's website to check whether a more recent version of the software is available.

Configuration software

UPSTools software allows the user to configure the UPS and provides a full view of the UPS parameters and
status through the RS232 serial port
Refer to the UPS Configuration paragraph for a list of the possible configurations available.
Installation operations:
• Connect the RS232 communication port on the UPS to a COM communication port on the PC using the
cable provided*.
• Follow the installation instructions given in the software manual in the UPSTools folder on the CD-
Rom provided.
Visit the manufacturer's web site to check whether a more recent version of the software is available.
*
It is recommended to use a cable with a max. length of 3 metres.
58