Jumper Settings For Management Controllers; Legacy Bios Support; Figure 2 - Jumper Block And Motherboard Headers - Intel S1200RP Getting Started

1.5

Jumper Settings for Management Controllers

The Intel® Server Board S1200V3RPS is equipped with several server management
featured that may need to be disabled for software development and validation.
Disabling the Baseboard Management Controller (BMC) and Manageability Engine (ME)
will disable watchdog timers, which reduces the chance of the system resetting when
debugging firmware.
We recommend the following settings on the Intel® Server Board S1200V3RPS:
•
•
Please refer to
1.6

Legacy BIOS Support

The Compatibility Support Module (CSM) can be enabled or disabled through setup:
4
Jumper J3K2 – position 2-3 (ME Force Update, Enabled)
Jumper J3K6 – position 2-3 (BMC Force Update, Enabled)
Figure 2 for motherboard jumper settings.

Figure 2 - Jumper Block and Motherboard Headers

Intel® Server Board S1200RP UEFI Development Kit
Getting Started with the
June 2016