Advertisement
Please note:
* Thank you for purchasing the ParaBody 881 LEG PRESS ADAPTER KIT. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH RULER:
1/2
0
IMPORTANT NOTES
Tools Required for Assembly
* 9/16" wrench
* Ratchet with 9/16" socket and 6" Ratchet extension
* Adjustable wrench
* Tape measure
Bolt Length Ruler
1/2
1/2
1
2
BOLT LENGTH
1/2
3
4
3
1/2
1/2
5
6
Advertisement
