Advertisement
FIGURE 10
3/8 X 4-1/2" 10
STEP 10:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2" PULLEY (4) and SECURELY assemble the 3-1/2" PULLEY
(4) to the SEAT FRAME using one 3/8 X 4-1/2" BOLT (10), two 3/8 X 1" SPACERS (13), two 3/8" FLANGE SPACERS (14) and
one 3/8" LOW HEIGHT LOCK NUT (12) as shown in FIGURE 10. Make sure the CABLE is in the grooves of all the pulleys.
FIGURE 11
3/8 X 2-3/4" 8
STEP 11:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2" PULLEY (4) and SECURELY assemble the 3-1/2" PULLEY
(4) to the MAIN ARM using one 3/8 X 2-3/4" BOLT (8), two 3/8" FLANGE SPACERS (14) and one 3/8" LOCK NUT (6) as shown
in FIGURE 11. Make sure the CABLE is in the grooves of all the pulleys.
1/2
0
SEAT FRAME
3
13
14
4
14
1/2
1
2
4
MAIN ARM
6
3
1/2
1/2
3
24
3/8" LOW HEIGHT
12
LOCK NUT
1/2
4
5
1/2
6
Advertisement
