Advertisement
Quick Links
Advertisement
Related Manuals for ParaBody 835101
Summary of Contents for ParaBody 835101
- Page 1 835101 HIP SLED PRODUCT ASSEMBLY INSTRUCTIONS SHEETS 10/09/95...
- Page 2 4 X 14 IN. NON SKID STRIP ... PARAGLIDE STRI~P 3 IN. DIA. WHEEL 2 IN. DIA WHEEL COVER CAP 2 SQ PARABODY LOGO ... NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF TIlE HEAD OF THE BOLT. /////// BOLT LENGTH BOLT LENGTH RULER: : ...
- Page 3 835101 HIP SLED ASSEMBLY PARTS LIST SORT AND COUNT ALL PARTS BEFORE BEGINNING ASSEMBLY WELDMENT PARTS: ITEM NAME/DESCRIPTION CARRIAGE WLDMNT FOOT PLATE WLDMNT PLATFORM WLDMNT PAD STOp PLATFORM ADJUSTMENT WLDMNT PLATFORM SLEEVE WLDMNT WEIGHT SUPPORT WLDMNT PAD SUPPORT WLDMNT RIGHT...
- Page 4 835101 HIP SLED ASSEMBLY INSTRUCT’IONS Insert two (2) 2 IN. SQ. END CAPS into each end of the base of the BASE WELDMENT. Insert four (4) 1/2 IN. ID FLANGE BEARINGS into the BUSHINGS on the BASE WELDMENT, four (4) 1/2 IN. ID FLANGE BEARINGS into the BUSHINGS on the PLATFORM as shown on drawing.
- Page 5 835101 HIP SLED ASSEMBLY INSTRUCTIONS Pull back the SPRING PIN on the PLATFORM SLEEVE and insert into it. Slide the PLATFORM ADJUSTMENT PIN. Assemble the PLATFORM ADJUSTMENT to the PLATFORM as shown on drawing using one (1) 1/2 X 4 IN. BOLT, and one (1) 1/2 IN. LOCK NUT. (TIGHTEN THE CONNECTION ENOUGH...
- Page 6 835101 HIP SLED ASSEMBLY INSTRUCTIONS SECURELY tighten the two (2) 3/8 X 4-1/2 IN. BOLTS from (STEP 13). (!!! BEFORE TIGHTENING MOVE THE RAILS IN AS FAR AS POSSIBLE) To adjust the side to side movement out of the CARRIA(~E, start by sliding the CARRIAGE left as possible inside the RAILS.
- Page 7 835101 EXERCISE SET-UP The PLATFORM can adjust into three positions. 35, 40, and 45 degrees The HIP SLED was designed with the SURE-LOC SYSTEM for ultimate safety. To activate the CARRIAGE STOP BARS from either the LEG PRESS or HACK SQUAT position, the CARRIAGE up.