FIGURE 4
STEP 4:
• Remove the two 3/8 X 4" BOLTS, four 3/8" WASHERS and two 3/8" LOCK NUTS from the REAR UPRIGHT as shown in
FIGURE 4. Discard the 3/8 X 4" BOLTS.
FIGURE 5
STEP 5:
• SECURELY assemble the PULLEY L-BRACKET (16) to the REAR UPRIGHT using two 3/8 X 4-1/4" BOLTS (19), four
previously removed 3/8" WASHERS and two previously removed 3/8" LOCK NUTS as shown in FIGURE 5.
16
7
REAR UPRIGHT
3/8 X 4" BOLTS
REAR UPRIGHT
19 3/8 X 4-1/4"