Advertisement
FIGURE 17
3/8 X 4-1/2" 10
STEP 17:
• Carefully route the SHORT LEG PRESS CABLE (2) around one 3-1/2" PULLEY (4) and SECURELY assemble the 3-1/2" PULLEY
(4) to the SEAT FRAME using one 3/8 X 4-1/2" BOLT (10), two 3/8 X 1" SPACERS (13), two 3/8" FLANGE SPACERS (14) and
one 3/8" LOW HEIGHT LOCK NUT (12) as shown in FIGURE 17. Make sure the CABLE is in the grooves of all the pulleys.
FIGURE 18
3/8 X 2-3/4" 8
STEP 18:
• Carefully route the SHORT LEG PRESS CABLE (2) around one 3-1/2" PULLEY (4) and SECURELY assemble the 3-1/2" PULLEY
(4) to the MAIN ARM using one 3/8 X 2-3/4" BOLT (8), two 3/8" FLANGE SPACERS (14) and one 3/8" LOCK NUT (6) as shown
in FIGURE 18. Make sure the CABLE is in the grooves of all the pulleys.
1/2
0
SEAT FRAME
2
13
14
4
14
1/2
1/2
1
2
4
MAIN ARM
6
2
1/2
3
4
15
3/8" LOW HEIGHT
12
LOCK NUT
1/2
1/2
5
6
Advertisement
