Vermont Castings vc75 Assembly Procedures page 8

VC50/75A ASSEMBLY
Step 9: Attach Side Shelves and Front Tool Holders
Required: (2) Side Shelves, (2) front tool holders, (8) # 10 x 1/2" bolts, (8) # 10 locknuts, (4) nylon insert
nuts, (4) self tap screws.
Assemble the side shelves to the shelf supports by positioning them up from below the supports. Ensure that
the long edge with 2 small holes face towards the grill. Once aligned, attach with (4) bolts and (4) locknuts
each (Fig 9A).
Insert (4) nylon insert nuts into the square holes in the front of the shelf supports. Hook the left and right
toolholders over the corresponding shelf supports, and attach with (2) self-tap screws each (Fig 9B).
Fig. 9A
Fig. 9B
Step 10: Attach Handles
Required: front door handle and screws, Handle grip (top and Bottom), (2) # 4 x3/4" screws.
Assemble the door handle with (2) screws provided (Fig 10A).
Install lid handle grips to the handle by snapping them together around the handle, then securing
them with (2) screws (fig 10B).
.
Fig. 10A
Fig. 10B
Page 8