Vermont Castings vc75 Assembly Procedures page 3

VC50/75A ASSEMBLY
Step 3: Assemble Bottom
Required: Bottom Pan, (4) 1/4" x 1-3/4" Hex Head Bolts, (4) 1/4 " Hex Nuts, (4) 1/4" Washers, (for pro-
pane models only – the Lower Tank Bracket, (2) 1/2" self tap screws, (2) 1/4" Washers only.
Assemble the Bottom Pan to the legs with 4 bolts and nuts as shown. Ensure the side with 5 holes at the
edge is facing up towards the front of the grill (Fig 3A). For propane models, also attach the lower tank
bracket to the right end, no washers are required (Fig 3B). Assemble the top flange of the lower tank
bracket to the bottom pan with (2) self tap screws. Tighten the fasteners.
Fig. 3B
Fig. 3A
Page 3