Water Connections To Chiller; In-Line Chlorine Feeders - Aquacal TropiCool TC500 Installation Manual

3.3.e Water Connections to Chiller
Connections to site plumbing are made via PVC solvent cement to the female slip socket of the plumbing unions.
l
The Chiller uses 2-inch union connections.
l
These unions are available from AquaCal
l
CAUTION - Failure to heed the following may result in equipment damage.
Do not use glue on the threaded portion of the equipment's unions. A glued-in-place union will prevent the
l
equipment from being properly winterized.
TropiCool
TropiCool
3.3.f In-Line Chlorine Feeders
Place in-line chlorinators downstream from the chiller and as low in elevation as possible. If an erosion type
feeder is used, always install a Hartford Loop to protect internal chiller components.
®
. See "Available Accessories" on page 27.
™
TC500
™
TC1000
Page - 6