Control Panel; Buttons; Indicator Lights; Display - Aquacal TropiCool TC500 Installation Manual

4.3 Control Panel

The following information outlines the operation for a standard installation.

4.4 Buttons

Buttons
Display Lock
Pool / Spa
Up Arrow
Down Arrow
Mode

4.5 Indicator Lights

Indicators
Pool
Spa
Cooling
Water Temp
Desired Temp

4.6 Display

Display
75
FLO
OFF
888
Page - 13
Sliding your finger across the buttons from left to right will
temporarily disable the display lock.
Select either the pool or the spa thermostat.
Used to increase temperature set point and navigate
though menu options.
Used to decrease temperature set point and navigate
though menu options.
Select chiller's operating mode.
The Chiller is referencing the pool thermostat.
The Chiller is referencing the spa thermostat.
Indicates the unit is cooling the water.
Please note - the compressor must be operating before this
light will illuminate.
Indicates current water temperature.
Indicates temperature set point is displayed. This is
displayed when "UP" or "DOWN" is selected.
The chiller is on and displaying the current water
temperature. In this example 75° F is displayed.
No water flow is detected. The filter pump is off or chiller
is not receiving correct water flow.
The chiller has been turned off via the mode selector
button or the temperature set point has been lowered
below 45° F.
The control program is initializing. This displays only as
power is applied to the chiller. The program version
number will then be displayed.
Control Panel
Description
Description
Description