7.2 Weights
NOTE:
Specifications subject to change.
Model Type
™
TropiCool
Table 6 - Equipment Weight
7.3 Access Panels
Access Panels (TropiCool
7.4 Initial Cooling Recommendations
The following recommendations will reduce the amount of time required to cool a pool or cold plunge
application. If unsure of equipment cooling capability, review equipment data plate. See "Identifying
Model Specifications" on page 26.
1. Confirm chiller mode has been set to COO .
2. Set thermostat to desired water temperature.
3. Temporarily override the filter pump's time-clock for continuous operation.
This will allow the Chiller the time required to cool the water at start-up.
l
After the water has reached the desired temperature, the time-clock can be reset to normal operating
l
time-frames.
7.5 Available Accessories
Automatic Sequencing Controller
An Automatic Sequencing Controller (ASC) provides easy control of all units from one lead unit and prevents the
l
simultaneous start-up of multiple chillers.
Site voltage drop is minimized and utilities are not subjected to large in-rush demands of electrical current.
l
Part number is based on number of chiller's to be controlled. Call AquaCal
l
correct configuration.
5 lb Bypass Valve Kit (Kit STK0135)
When high flow rates are outside recommended tolerances, please use this kit or an alternative bypass valve
l
system.
This kit can be used to control excessive water flow through the chiller. It provides automatic flow adjustments
l
for most applications.
Page - 27
Model Number
TC500
™
)
Install Weight
215 Pounds
®
Customer Support for assistance with