Combination Switch - Mercedes-Benz B-Class Electric Drive W245 Operator's Manual

Exterior lighting
100
To switch on: turn the light switch to T.
X
The green T indicator lamp in the instru-
ment cluster lights up.
Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is illumina-
ted.
To switch on the standing lamps: the
X
SmartKey should not be in the ignition lock
or it should be in position 0.
Turn the light switch to W (left-hand side
X
of the vehicle) or X (right-hand side of
the vehicle).

Combination switch

Turn signal
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or switch on the ignition.
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
In the à position, the high-beam head-
lamps are only switched on when it is dark
and the ignition is on.
The blue K indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam head-
X
lamps: move the combination switch back
to its normal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
High-beam flasher
To switch on: turn the SmartKey in the
X
ignition lock to position 1 or 2, or switch on
the ignition.
Pull the combination switch in the direction
X
of arrow =.
Hazard warning lamps