Memory Functions - Mercedes-Benz B-Class Electric Drive W245 Operator's Manual

The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have disen-
R
gaged reverse gear
if you press button : for the exterior mir-
R
ror on the driver's side

Memory functions

Storing settings
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G WARNING
When the memory function adjusts the seat,
you and other vehicle occupants – particularly
children – could become trapped. There is a
risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat. If somebody
becomes trapped, immediately release the
memory function position button. The adjust-
ment process is stopped.
G WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey isn't in the igni-
tion lock.
Memory functions
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
Adjust the seat (
X
Y
Adjust the exterior mirror on the driver's
X
side ( page 93).
Y
Briefly press the M memory button and
X
then press storage position button 1, 2 or 3
within three seconds.
The settings are stored in the selected pre-
set position, and a confirmation tone
sounds.
Calling up a stored setting
Press and hold the relevant storage posi-
X
tion button 1, 2 or 3 until the seat and
exterior mirrors are in the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
page 89).
Z
95