Mercedes-Benz B-Class Electric Drive W245 Operator's Manual page 188

Menus and submenus
186
Example:
Set departure time: 6:41 a.m.
R
End time for standard high-voltage battery
R
charging: 6:00 a.m.
RANGE PLUS condition of charge at
R
6:41 a.m.: 50%
The maximum additional range is
R
decreased by 50 percent.
Pre-entry climate control at time of depar-
ture
If you activate the "Rem. Climate Control at
departure time" function, the vehicle interior
is heated or cooled prior to a desired depar-
ture time.
i
To heat or cool the vehicle interior for a
desired departure time, the high-voltage
battery must be sufficiently charged. Acti-
vate the climate control function primarily
when the high-voltage battery is being
charged. You must also set a departure
time using the
( page 185).
Y
Switching "Pre-entry climate control at depar-
ture time" on/off
Press the = or ; button on the steer-
X
ing wheel to select the
Use 9 or : to select the
X
submenu.
Press a to confirm.
X
Press 9 or : to select
X
mate Control At Departure mate Control At Departure Time
Press a to activate or deactivate.
X
The vehicle interior will then be heated or
cooled prior to the predefined departure
time.
E-CELL E-CELL submenu
Settings Settings menu.
E-CELL E-CELL
Rem. Cli‐ Rem. Cli‐
Time.
If a departure time is selected, the yellow
indicator lamp lights up on the auxiliary
heating button.
You can use the on-board computer to specify
up to three departure times in the
submenu. One of the specified departure
times may be preselected (
Pre-entry climate control (via SmartKey)
Pre-entry climate control (via SmartKey) is
switched on temporarily when the vehicle is
unlocked using the SmartKey. In order to
switch on pre-entry climate control via the
SmartKey, the function has to be activated
using the on-board computer.
Activating/deactivating pre-entry climate
control (via SmartKey)
Press the = or ; button on the steer-
X
ing wheel to select the
Use 9 or : to select the
X
submenu.
Press a to confirm.
X
Press 9 or : to select
X
Climate Cont. (Via Key) Climate Cont. (Via
Press a to activate or deactivate.
X
If pre-entry climate control (via SmartKey)
is activated, pre-entry climate control (via
SmartKey) is switched on temporarily when
you unlock the vehicle.
Setting the maximum charge current
Before charging the high-voltage battery,
check the maximum permissible charge cur-
rent for the relevant power socket.
You can set a maximum charge current in the
E‑CELL E‑CELL menu.
It is only necessary to select the maximum
charge current if there are no charge current
settings on the charging cable.
i
The maximum charge current values in
the on-board computer may deviate from
the charging cable values.
E-CELL E-CELL
page 185).
Y
Settings Settings menu.
E-CELL E-CELL
Pre-Entry Pre-Entry
Key).