Restarting - Mercedes-Benz B-Class Electric Drive W245 Operator's Manual

Observe the instructions and safety notes in
the display messages in the "Tires" section
( page 211).
Y
i
If the wheel positions are rotated, the tire
pressure may be displayed for the wrong
positions. This is rectified after a few
minutes of driving, and the tire pressures
are displayed for the correct positions.
Restarting the tire pressure monitor
When you restart the tire pressure monitor, all
existing warning messages are deleted and
the warning lamps go out. The monitor uses
the currently set tire pressures as the refer-
ence values for monitoring. In most cases, the
tire pressure monitor will automatically
detect the new reference values after you
have changed the tire pressure. However, you
can also define reference values manually as
described here. The tire pressure monitor
then monitors the new tire pressure values.
Set the tire pressure to the value recom-
X
mended for the corresponding driving sit-
uation on the Tire and Loading Information
placard on the driver's side
B-pillar ( page 281).
Y
Additional tire pressure values for different
operating conditions can also be found on
the tire pressure table on the inside of the
charge socket flap (
Make sure that the tire pressure is correct
X
on all four wheels.
Make sure that the SmartKey is in position
X
2 in the ignition lock.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the 9 or : button to select
X
Tire Pressure Tire Pressure.
Press the a button.
X
The multifunction display shows the cur-
rent tire pressure for the individual tires or
the Tire pressure Tire pressure will
page 281).
Y
Serv. Serv. menu.
will be be displayed displayed
after driving a few minutes after driving a few minutes
sage.
Press the : button.
X
The Use Current Pressures as New Use Current Pressures as New
Reference Values Reference Values
the multifunction display.
If you wish to confirm the restart:
Press the a button.
X
The Tire Press. Monitor Restarted Tire Press. Monitor Restarted
message appears in the multifunction dis-
play.
After driving for a few minutes, the system
checks whether the current tire pressures
are within the specified range. The new tire
pressures are then accepted as reference
values and monitored.
If you wish to cancel the restart:
Press the % button.
X
The tire pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tire pres-
sure monitor
Country Radio type approval number
Brazil 1489-10-4415
Model: MRXMERCTX1
Dubai TRA, Registered NO
0016161/08
TRA, Registered NO
ER0076990/11
Dealer NO: DA0047074/10
Morocco MR5526 ANRT 2010/
27/04/2010
MR6706 ANRT 2011/
17/11/2011
Philip- ESD-1105558C
pines
Serbia И 011 12
Tire pressure
mes-
message appears in
Z
287