Rear Window Wiper - Mercedes-Benz B-Class Electric Drive W245 Operator's Manual

Switching the rear window wiper on/
off
Combination switch
è Switch
:
ô To wipe with washer fluid
2
I To switch on intermittent wiping
3
0 To switch off intermittent wiping
4
ô To wipe with washer fluid
5
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Turn switch : on the combination switch
X
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.
Replacing the wiper blades
Important safety notes
G WARNING
If the windshield wipers begin to move while
you are changing the wiper blades, you could
be trapped by the wiper arm. There is a risk of
injury.
Always switch off the windshield wipers and
ignition before changing the wiper blades.
! To avoid damaging the wiper blades,
make sure that you touch only the wiper
arm of the wiper.
! Never open the hood/tailgate if a wiper
arm has been folded away from the wind-
shield/rear window.
Windshield wipers
Never fold a windshield wiper arm without a
wiper blade back onto the windshield/rear
window.
Hold the windshield wiper arm firmly when
you change the wiper blade. If you release
the wiper arm without a wiper blade and it
falls onto the windshield/rear window, the
windshield/rear window may be damaged
by the force of the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at a qualified
specialist workshop.
Changing the windshield wiper blades
Removing the wiper blades
Remove the SmartKey from the ignition
X
lock.
Fold the wiper arm away from the wind-
X
shield.
Press both release clips ;.
X
Fold wiper blade : in the direction of
X
arrow = away from wiper arm ?.
Remove wiper blade : in the direction of
X
arrow A.
109
Z