Section 4 - Configuration
Select Static IP if your ISP provides you with a specific IP address.
WAN Settings
Connection:
Select Static IP Address.
WAN
Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed
Connection Type:
IP VC-Mux.
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask provided by your ISP.
Default Gateway:
Enter the default gateway address provided by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage:
Select None or Default Route.
NAT Enable:
Enable or disable Network Address Translation.
Enable PPPoE
Enable or disable PPPoE Passthrough.
Passthrough:
Click Save when you are done.
D-Link DSL-3782 User Manual
Static IP
31