D-Link DSL 3900 Quick Start Manual

Hide thumbs Also See for DSL 3900:

Download this manual

DLINK DSL 3900 - VDSL

Step 1

Connect your nbn™ equipment and modem using the setup guide provided for

your technology type. If you have not completed this, please refer back to the

nbn™set up guides.

Step 2

Ensure the modem is powered on. Using a pin, reset the modem by pressing

and holding the reset button on the modem until all the lights go off.

Step 3

Using your own device (computer, laptop, tablet or smartphone), connect to the

modem using one of the two options shown below: Ethernet cable directly to the

Ethernet port or WiFi.

Ethernet

Connect the Ethernet cable (this is usually yellow, blue, grey or white) as shown

below from the Ethernet port (LAN port) on the modem to the Ethernet port on

your computer or laptop.

Page 1 DLINK DSL 3900 - VDSL Step 1 Connect your nbn™ equipment and modem using the setup guide provided for your technology type. If you have not completed this, please refer back to the nbn™set up guides. Step 2 Ensure the modem is powered on. Using a pin, reset the modem by pressing and holding the reset button on the modem until all the lights go off.
Page 2 You may see a login page and if the details are not already prefilled, use the below default settings: Default username: admin Default password: Enter your D-link password (by default the password should be left blank). Otherwise, log in with the password you have set for the modem.
Page 3 Step 5 Once logged in, a setup wizard should automatically appear. Click Next to continue. Step 6 Replicate the below settings: 1. WAN Access Type – VDSL 2. Country – Australia 3. ISP - Other Step 7 If your modem does not detect the correct settings, a field showing connection types will be listed on your screen.
Page 4 If you have a VoIP service, please contact us (contact details are below). Step 11 We recommend changing your default password to avoid any potential security breaches. Click Management(at the top of the page) → System → Admin. Under admin, input details and click Save.