Table of Contents
Advertisement
Section 4 - Configuration
2.4 GHz / 5 GHz Advanced Settings
The default setting is Disabled. Select Enabled if you do not want
Hide SSID:
to broadcast the SSID of your wireless network.
Note: Hiding your SSID is not a form of security alone.
WMM:
Enable or disable WMM QoS for your wireless network. This can
help to improve the quality of video and voice applications for your
wireless clients.
Wi-Fi Protected
Enabled or disable WPS functionality of this device.
Enable:
Wi-Fi Protected
The current WPS functionality status is displayed.
Status:
Signal-Interval:
Set the rate at which your wireless network is advertised. The default
is 100 milliseconds.
DTIM:
Specify the Delivery Traffic Information Map (DTIM) message interval.
Transmitting
Select the desired wireless transmission power. The available options
Power:
are 100%, 50%, 25%, or 12.5%. The default is 100%.
Threshold for
The fragmentation threshold, which is specified in bytes, determines
fragmentation
whether packets will be fragmented. Packets exceeding the 2346
(2.4 GHz only):
byte threshold will be fragmented before transmission. 2346 is the
default setting.
2.4 GHz 802.11
Select the desired wireless networking standard(s) to use. The
available options are 11B Only, 11G Only, Mixed 11G/B, 11N Only,
Mode:
Mixed 802.11g/n, or Mixed 802.11b/g/n.
D-Link DSL-3782 User Manual
Advanced Settings (continued)
40
Hide quick links:
Advertisement
Table of Contents
