Section 4 - Configuration
VDSL is one of the latest and fastest home broadband technologies. VDSL uses
the DSL port on your DSL-3782 to connect to the Internet. In order for your
DSL-3782 to use VDSL, you must configure the ATM VC Settings and your WAN
Settings.
Configure your
Select VDSL to configure ADSL connection settings.
WAN connection:
If you click on Advanced Settings, the following WAN Settings are available:
PTM VC Settings
Service Number:
Select the service number from the drop-down menu. 1-8 are
available. The default is 1.
Enable Virtual
Select whether to enable or disable this Virtual Circuit.
Circuit:
Vlan ID:
Enter the VLAN ID. Enter a value from 10 - 4096. The default value is
835.
To set your IPv4 connection parameters of WAN Settings, refer to WAN
Settings on page 30.
D-Link DSL-3782 User Manual
VDSL
29