Table of Contents
Advertisement
Section 4 - Configuration
This section will allow you to change the local network settings of the router
and to configure the DHCP settings. To access this page, click Network from
the Settings menu on the bar on the top of the page.
Router Settings
Router IP Address:
Enter the IP address of the router for this interface. The default IP
address is 192.168.1.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Subnet Mask:
Enter the subnet mask of this interface. The default subnet mask is
255.255.255.0.
Enable Second IP:
Enable or disable the dual LAN IP capability of this router. The default
setting is Disabled.
Second IP
Enter the second IP address of the router for this interface. The default
Address:
IP address is 192.168.2.1.
Second Subnet
Enter the second subnet mask of this interface. The default subnet
Mask:
mask is 255.255.255.0.
UPNP Settings
UPNP:
Enable or disable UPNP.
Click Save when you are done or click Advanced Settings.
D-Link DSL-3782 User Manual
Network
44
Hide quick links:
Advertisement
Table of Contents
