Table of Contents
Advertisement
Submenu
Setting
[Color Temp.]
Select the color temperature to be used
in the selected User Preset.
[D65]
[D93]
[D61]
[D55]
[DCI]
[User1]
[User2]
[User3]
[User4]
[User5]
[DCI XYZ]
Notes
If you measure the color
temperatures of different display
types, such as CRT, LCD, or OLED,
by using a common (or general)
color analyzer that is based on CIE
1931, and adjust the xy chromaticity
to the same value, the appearance
may be different because of optical
spectrum differences.
To compensate for this difference,
the [D65], [D93], [D61], and [D55]
settings of the monitor are adjusted
by an offset
When the XYZ format signal is
input, set to [DCI XYZ].
[Contrast]
Set the contrast of the selected User
Preset.
[Brightness]
Set the brightness of the selected User
Preset.
[Chroma]
Set the chroma level of the selected User
Preset.
Note
When [S-Log3(HDR)], [S-
Log2(HDR)], [SMPTE ST 2084(HDR)],
[HLG SG 1.2(HDR)] or [HLG SG
Variable(HDR)] is selected for [EOTF]
in the [Input Setting] menu, this does
not function.
For details on the EOTF setting, see
page 29.
[Aperture]
Set the aperture of the selected User
Preset.
[Marker Preset]
Select the marker preset to be used in
the selected User Preset.
[Marker Preset1]
[Marker Preset2]
[Marker Preset3]
[Marker Preset4]
[Marker Preset5]
1)
.
Submenu
Setting
[Copy From]
Copies the other User Preset data to the
selected User Preset. The appropriate
settings are saved in [Default(D65)] for
D65, [Default(D93)] for D93, and
[Default(XYZ)] for XYZ format signal.
[User Preset1]
[User Preset2]
[User Preset3]
[User Preset4]
[User Preset5]
[Default(D65)]
[Default(D93)]
[User Preset XYZ]
[Default(XYZ)]
1) The offset value applied (x–0.006, y–0.011) is based on the Judd's
function to the CIE 1931 (x, y) value.
[Color Temp.] menu
You can select and adjust the color temperature.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konica Minolta Color Analyzer CA-
210/310
Submenu
Setting
[Manual Adjustment] If you set the [Color Temp.] to the
[User1] to [User5] setting, you can
adjust the color temperature.
The set values are memorized.
[Adjust Gain/Bias]:
[Signal]:
[R/G/B Gain]: Adjusts the
color balance (gain) of R (red)/
G (green)/B (blue).
[R/G/B Bias]: Adjusts the
color balance (bias) of R
(red)/G (green)/B (blue).
[Internal]: Select to adjust the
white balance by using the
internal signal. When the XYZ
format signal is input, the
internal signal is displayed as
2
D65 48cd/m
.
[External]: Select to adjust the
white balance by using the
signals input from an external
device.
Adjustment Using the Menus
25
Advertisement
Table of Contents
