Sony PVM-X550 Operating Instructions Manual page 15

Power button
Button Operations
MONITOR Switches the operating mode of the
switch monitor.
Press the button for the sleep mode
when the monitor is in the operating
mode. The power indicator on the front
panel lights in red.
Press the button for the operating mode
when the monitor is in the sleep mode.
Rotary encoder/MANUAL buttons
Knob Operations
CONTRAST knob Adjusts the picture contrast.
BRIGHT knob Adjusts the picture brightness.
CHROMA knob Adjusts the color intensity.
PHASE knob Available only in the color temperature
adjusting menu.
No other operations are available.
Button Operations
CONTRAST Press the button to adjust contrast
MANUAL button manually.
BRIGHT MANUAL Press the button to adjust brightness
button manually.
CHROMA MANUAL Press the button to adjust color intensity
button manually.
PHASE MANUAL Available only in the color temperature
button adjusting menu.
No other operations are available.
Function buttons
Button Operations
F1 to F16 button Turns on or off functions assigned to
the function buttons on the controller.
The following functions are available.
For details on each function, see "About
functions assigned to the ASSIGN 1/2
buttons" (page 33).
[Mono], [Blue Only], [Native Scan], [R
Off], [G Off], [B Off], [Character
1)
Off] , [Aperture] (selecting the
manually adjusted setting in
[Aperture]), [Marker], [Aspect
Marker], [Area Marker1], [Area
Marker2], [Center Marker], [Aspect
Marker-Line], [Aspect Blanking-Half],
[Aspect Blanking-Black]
1) You can hide the menu during the
picture control. Push again restore
the original menu.
Numeric buttons
Button Operations
0 button Press the button to perform Panel
Calibration.
Press the button to display the
confirmation screen and press the 0
button again or select [Confirm] and
press the ENTER button to perform
Panel Calibration.
Press the MENU button or select
[Cancel] and press the ENTER button
to cancel Panel Calibration while the
confirmation screen is displayed.
For details on the Panel Calibration
function, see [Panel Calibration]
(page 27).
1 to 9 button Turns on or off functions assigned to
the numeric buttons from 1 to 9 on the
controller.
The factory default settings are
following:
1 button: [SDI1 4K]
2 button: [SDI1 2K]
3 button: [SDI2 4K]
4 button: [SDI2 2K]
5 button: [HDMI]
6 button: [Native Scan]
7 button: [Internal Signal]
8 button: [User Preset1]
9 button: [User Preset2]
Each function can be assigned at
[Function/Numeric Button Setting]
(page 38) of the [Serial Remote] menu.
Ent button Operates similar to the ENTER button
on the controller.
Note
You can connect up to 3 BKM-16R units to the PVM-
X550.
Location and Function of Parts and Controls
15