Table of Contents
Advertisement
Location and Function of Parts and Controls
Front Panel/Side Panel
CALIBR. (Calibration) indicator
Lights up in yellow when performing Panel Calibration
is necessary. [Recommend Calibration] is also displayed.
Blinks in yellow when performing Panel Calibration.
When Panel Calibration is finished, the CALIBR.
indicator will be turned off and the (Power) indicator
will light up in red.
If Panel Calibration is not finished normally, the
indicator lights in yellow the next time the unit is started.
At this time, the following message is displayed.
[Recommend Re-calibration]: Previous Panel
Calibration is not completed successfully. Execute Panel
Calibration again.
Note
If the yellow light persists after performing Panel
Calibration more than a few times, contact an
authorized Sony dealer.
STATUS indicator
Slowly flashes in yellow when the screen saver starts up,
and quickly flashes in yellow when a warning during
startup occurs.
Lights up in blue during HDR display. Slowly flashes in
blue when the screen saver displaying in HDR starts up,
and quickly flashes in blue when a warning during
startup occurs.
For details on the HDR (High Dynamic Range) display, see
page 29.
OVER RANGE indicator
Lights in amber when ABL (Automatic Brightness
Limiter) starts.
(Power) indicator
Pressing the (Power) switch on the side turns on the
power.
When the unit turns on, the unit starts up with the
indicator flashing in green. When the unit is operating,
the indicator lights in green.
The indicator turns off when the power is off.
The indicator lights up in red during the sleep mode.
(Power) switch
When the unit is turned off, press the switch to turn it
on. Press the switch again to turn off the unit.
MENU button
When the on-screen menu is not displayed, press the
button to display the menu. Press again to clear the
menu.
Menu operation buttons
/ buttons
When the menu is displayed, press the buttons to
select a menu item or setting value.
ENTER button
When the menu is displayed, press the button to
confirm a menu item or setting value.
Location and Function of Parts and Controls
13
Advertisement
Table of Contents
