[User Configuration] Menu - Sony PVM-X550 Operating Instructions Manual

Professional video monitor
Hide thumbs Also See for PVM-X550:
Table of Contents

Advertisement

Submenu
Setting
[Copy From]
Select from the following items to copy
the white balance data of the selected
color temperature.
[D65]
[D93]
[D61]
[D55]
[DCI]
[User1]
[User2]
[User3]
[User4]
[User5]
[DCI XYZ]
Notes
If [Password Lock] has been turned
[On], the [User1] value is protected
by a password. To change the values,
enter the password.
The color temperature data is used
commonly regardless of the signal
format or the EOTF setting. When
the color temperature is adjusted
under certain conditions, the
adjusted result is reflected in all
displays on which the same color
temperature data is set.

[User Configuration] menu

Executes [System Setting], [Input Setting], [Assign
Button Setting], [Audio Setting], [Internal Signal
Setting], [Gamut Marker Setting], [Area and Aspect
Marker Setting], and [Quad View Setting].
[System Setting]
Submenu
Setting
[LED Brightness]
Selects the brightness of the indicator’s
LED of the buttons, power switch, etc.
[High]: The level of the LED
brightness becomes high.
[Low]: The level of the LED
brightness becomes low.
[Format Display]
Selects the display mode of the signal
format.
[Auto]: The format is displayed for
about five seconds when the
input of the signal starts.
[Off]: The display is hidden.
[Flicker Free]
Set this to [On] to enable view images
without flicker.
An OLED panel can provide superior
video responsiveness and scan driving,
reproducing images with little contour
or afterimage. However, scan driving
can cause flicker when input signals
have a low vertical frequency (24P/PsF,
50i, etc.). Set [Flicker Free] to [On] to
greatly reduce this phenomenon.
With this mode set to on, quick-moving
images may exhibit contours or an
afterimage.
Notes
In the HDR display, [Flicker Free]
cannot be selected. Always set to
[On].
When [Flicker Free] is set to[Off],
the whole screen becomes dark. The
display of the menu, etc. also
becomes dark. To check the
brightness, set [Flicker Free] to
[On].
For details on the HDR (High Dynamic
Range) display, see page 29.
Page 26

Advertisement

Table of Contents
loading

Table of Contents