Operation Procedure; Turning On The Air Conditioner; Ventilating Operation; Cooling Operation - Electra DNG 18 Service Manual

OPERATION PROCEDURE

TURNING ON THE AIR CONDITIONER

Press START/STOP button (1) to turn the air conditioner on. Note that the
LCD operation display (13) will always show the last mode of operation and
previous function used.
Follow the instructions if you choose to change the control settings; otherwise,
the air conditioner will start and operate in the same mode and functions
prior to being turned off.

VENTILATING OPERATION

Select the ventilating mode by pressing MODE button (2). Switch to the
desired fan speed by pressing FAN speed button (4).

COOLING OPERATION

Select the COOLING mode by pressing MODE button (2). Switch to the
desired FAN SPEED or to AUTO FAN by pressing button (4). Select suitable
temperature setting. By selecting the COOLING mode, the air flap will move
automatically to horizontal air delivery position, optimal for cooling.

COOLING OPERATION WITH AUTO FAN MODE

This operation starts with the highest air flow in order to quickly lower the
room temperature. It will then automatically switch to the low air flow to
quietly maintain the selected temperature.

HEATING OPERATION

Select the HEATING mode by pressing MODE button (2). Switch to the
desired FAN SPEED or to AUTO FAN by pressing FAN button (4). Select
suitable temperature setting. By selecting the HEATING mode, the air flap
will move automatically to vertical air delivery position, optimal for heating.

HEATING OPERATION WITH AUTO FAN MODE

This operation starts with the highest air flow in order to quickly raise the
room temperature. It will then automatically switch to a lower air flow to
quietly maintain the selected temperature. HEATING with AUTO FAN will
automatically provide the user with the HOT KEEP function. The fan will be
turned off when the indoor coil temperature is not sufficiently hot to prevent
uncomfortable cold air drafts.
English 7
APPENDIX A