Gemini 620pd Profiling Product Manual page 65

Setting the computer IP address in Windows 7
A list of attached network devices should now present itself. Find the one which the
sonar is to be connected to and double-click on it.
The Local Area Connection Properties dialog should be displayed. Find
the entry labelled Internet Protocol Version 4 (TCP/IPv4), select it
and then click on the Properties button.
In the properties dialog which opens there will either be Obtain an IP address
automatically or Use the following IP address selected. If an IP
address is already present, make a note of it before changing any values since it will be
needed if the computer is ever restored to the previous network. Refer to appropriate
section of this manual for the correct IP addresses to use.
0695-SOM-00001, Issue: 03
65
Gemini Profiling System
© Tritech International Ltd.