Care & Maintenance Of The Gemini Profiler; After Using The Sonar; If Storing The Sonar For Extended Periods; Regular Maintenance - Gemini 620pd Profiling Product Manual

6. Care & Maintenance of the Gemini Profiler

6.1. After using the sonar

Make sure that after using the sonar head that it is washed down with fresh water
and check the unit for any signs of obvious damage. Pay particular attention to the
transducer head and free any organic matter which has become trapped. Once the unit
is clean; dry thoroughly and place in storage container.

6.2. If storing the sonar for extended periods

Make sure that the sonar is completely dry (if necessary leave to air-dry before
stowing). Pack into storage container along with several pouches of silica gel.

6.3. Regular maintenance

There are no user serviceable parts inside the sonar and it is not necessary to take it
apart for any maintenance tasks. In light usage as long as the unit is washed thoroughly
with clean fresh water after every use and dried before storage no further maintenance
is required. If the unit is in regular use, or submerged routinely for extended periods, it
is advisable to arrange for an annual service to be carried out by Tritech International
Ltd This service will enable the unit to be checked thoroughly or for any worn parts
to be replaced and will enable long-term trouble free operation of the sonar head.
0695-SOM-00001, Issue: 03
23
Gemini Profiling System
© Tritech International Ltd.