Table of Contents
Advertisement
Gemini Software Operation
If more than one Gemini Sonar is connected and powered, its details will appear
on the System Data screen. The currently active sonar will have green text and the
dormant sonar(s) will be in yellow.
For a multiple sonar setup the arrows allow the list of sonars to be scrolled.
12.5. Serial Data Input
12.5.1. Sensors
The Sensors tab is for displaying extra information from connected RS232 sensors.
12.5.2. Gemini Hub
Hubs Tab
The Hubs tab shows the status information from any connected Gemini Hubs.
0695-SOM-00001, Issue: 03
Note
The Settings field of the Sensors tab is only active if logging is
taking place. Within the Settings field the actions of the operator are
recorded so that during play back of the log file it is possible to see which
settings have been changed.
Note
The Gemini software only supports connection to one Gemini Hub.
54
Gemini Profiling System
© Tritech International Ltd.
Advertisement
Table of Contents
Troubleshooting
