Using With The Tritech Scu - Gemini 620pd Profiling Product Manual

Introduction

1.3. Using with the Tritech SCU

The Tritech International Ltd Surface Control Unit (SCU) is a specially designed
rack mountable computer containing embedded software for use with Tritech
International Ltd sonar equipment. The Gemini range require a higher specification
of hardware than other Tritech products so will only work with the later versions of
the SCU from SCUv5 onwards (either Windows XP or Windows 7 versions).
The profiling heads should be connected to the SCU through a Gemini Hub or
Ethernet/VDSL adapter.
If integrating the SCU into a network (as illustrated in Chapter 2, Example Survey
Setup) then depending on the configuration it may necessary to use a SCU with an
additional network interface fitted or use an external network switch.
0695-SOM-00001, Issue: 03
10
Gemini Profiling System
© Tritech International Ltd.