12. Gemini Software Operation
12.1. Getting Ready to Use the Software
Before starting, check that the software is running in Profiler mode. The title bar of
the program should read Gemini Profiling Sonar:
If the titlebar is different, then it will be necessary to change the software to operate
in Profiler mode by selecting Profiler from Configuration Options (on
the Advanced screen):
When the Gemini software is running, it presents a choice of two screens, which are
selected by clicking on the tabs at the top left hand of the screen. The two screens are
the User screen and the Advanced screen. The User screen allows the maximum
amount of screen to be used for data display and the Advanced screen enables
adjustment of the sonar settings.
12.2. Keyboard Shortcuts
A number of keyboard shortcuts are available for commonly used activities.
Ctrl f
capture screen to file
a
increase gain
d
increase range
g
increase aperture
0695-SOM-00001, Issue: 03
Note
The User screen is not considered separately within this document - the
User screen has a subset of the controls for the Advanced screen with
no added functionality.
Note
To gain access to the online help press the F1 button on the keyboard.
F7
toggle logging of data
z
decrease gain
c
decrease range
b
decrease aperture
36
Gemini Profiling System
© Tritech International Ltd.