Gemini 620pd Profiling Product Manual page 40

Gemini Software Operation
Clicking the image will start the file playing and the image will change to a Pause
control (two vertical lines).
Clicking the image again will pause the file replay and the image will change back
to the Play control (triangle).
Stop Button
The Stop button stops file replay and resets the play progress to the start.
Repeat Button
If the Repeat button is active and the player reaches the end of the file it is playing,
it will return to the start of the file and continue. Clicking the Repeat button will
alternate between the repeat being active and inactive.
Load Button
When the Load button is pressed, the software will open a file selector to allow
the user to select a previously recorded data file to be replayed. To replay the data
recorded at 4:30:02pm on 18th October 2014, file selector would look like this and
the file 163002_IMG.ecd should be selected.
When replaying a log file, the filename, together with the date and time of recording,
will be displayed at the bottom of the screen (below the sonar image) in green text,
for example:
Frame Number and Speed Control
The Frame control is a slider bar which allows the user to move quickly around the
file that has been loaded. The number at the right hand end is the currently displayed
frame number from the file. The slider can be grabbed to move quickly to any position
0695-SOM-00001, Issue: 03
40
Gemini Profiling System
© Tritech International Ltd.