Changing The Battery; Battery Warning Information; Assembling Of Cord & Earphone - ReSound CP1BW-V User Manual

Changing the Battery

The battery compartment can be
opened on the side just below the
On/Off switch.
Insert the new battery with the +
side facing the + inside the battery
compartment. If you are replacing
an old battery please remove this
with the help of the transparent
Battery Remove Band before
inserting a new one.
Always use a type 1.5 volt Penlight (IEC 86-R03/AAA) battery,
and it is recommended to use Alkaline battery for longer
battery life time. Please note that a weak battery can cause
the hearing instrument power to be reduced.
Please read battery warning information carefully.

Battery Warning information

Batteries contain dangerous substances and should be dis-
posed of carefully in the interest of your safety and for the
environment.
If the batteries are not inserted correctly, the device
will not work and the batteries may build up heat. If this
happens, please remove the batteries (Please be aware
that the batteries might be hot so make sure to use the
removal strip). Insert new batteries in correct orienta-
tion.
• Do NOT attempt to recharge batteries which are not
specifically designated rechargeable as they may leak or
explode.
• Do NOT attempt to dispose of batteries by burning
them.
• Keep batteries away from small children and pets.
• Do NOT place batteries in your mouth.
If swallowed, seek immediate medical attention.
8
Assembling of Cord & Earphone
The hearing instrument will only function when an ear phone
receiver is connected to the main body through an ear
phone cable and the USB-like plug marked in the illustra-
tion below.
Insert the cable in the receiver outlet indicated and insert the
cable in the ear phone, please make sure that the pins on
the cable is fit to the correct pin holes in the ear phone as
they differ in size – see illustration below.
9