Changing The Battery - ReSound Pulse LT PSS60 User Manual

Fully-digital hearing instrument
Hide thumbs Also See for Pulse LT PSS60:
Table of Contents

Advertisement

2. Grasp the sound tube where it bends
and push the dome into your ear
canal. The dome should be placed
far enough into the ear that
the sound tube lies flush with
your head. When the dome is
placed appropriately, you should
not see the sound tube sticking out when you look
directly into a mirror.
3. Position the Sports Lock into the
indentation above the earlobe. If the
device whistles, the most likely reason
is that the dome is not placed correctly
in the ear canal. Other reasons can be
build-up of earwax in the ear canal,
or that the sound tube connection to
the instrument has become loose, in which
case the sound tube must be changed.
It is also possible that the instrument settings are not
optimal. If you have ruled out other reasons for the in-
strument squealing, it is recommended to contact your
hearing care professional.
10

Changing the Battery

When the battery voltage/power decreases to a certain
level, the instrument will emit four soft beeping signals.
This sequence will continue every five minutes until the in-
strument automatically switches off. The occurrence of the
sequence can differ by using rechargeable batteries and
also between different battery brands.
It is recommended that you
keep a spare battery on hand.
Open the battery
compartment
completely by using
your fingernail. After
removing the old battery,
insert the new one.
Always use Zinc-Air or rechargeable
batteries of the size printed on your instrument (see page
7 "Your ReSound Pulse LT Hearing Instrument", point 8).
Removing the battery when you are not wearing the instru-
ment for a longer period will help prevent corrosion of the
battery contacts.
11

Advertisement

Table of Contents
loading

Table of Contents