Advanced Nat/Route Mode Settings - D-Link DFL-500 User Manual

Default Gateway:
Primary DNS Server:
Secondary DNS Server:
Web Server:
Mail Server:
Internal Server
Settings:
FTP Server:
If you provide access from the Internet to a web server, mail server, or FTP server installed on an
internal network, add the IP addresses of the servers here.

Advanced NAT/Route mode settings

Use Advanced DFL-500 NAT/Route mode settings
DFL-500 NAT/Route mode settings.
Advanced DFL-500 NAT/Route mode settings
DHCP:
External
PPPoE:
Interface:
If your ISP supplies you with an IP address using PPPoE, record your PPPoE user name and
password.
DHCP Server
Settings:
The DFL-500 contains a DHCP server that you can configure to automatically set the addresses of
the computers on your internal network.
DFL-500 User Manual
SMTP:
POP3:
to gather the information you need to customize advanced
If your ISP supplies you with an IP address using DHCP no further information is
required.
User name:
Password:
Starting IP:
Ending IP:
Netmask:
Default Route:
DNS IP:
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
19